Z-Saw Blades for Reciprocating Saws

Z-Saw Blades for Reciprocating Saws

Make smoother, more efficient cuts with you reciprocating saw (Sawzall). Z-Saw's reciprocating blades fit all reciprocating saws with the standard shank. We offer three blades fro differnet applications.

Blade Types

The Pruning Blade is 210mm (8-1/4") long). It's great for limbing trees and bushes and cutting up small limbs. It's the same length and tpi as the Silky Gomboy Saw that we've sold for more than 30 years. It cuts just as well - you just don't have to work as hard.

The Fine Wood & Pruning Blade is 300mm (11-13/16") long. It has the capacity to cut bigger limbs than the standard pruning blade. It's slightly coarser tooth and thicker blade fpor more durability. Z-saw recommends this blade for use only on corded saws or codless saw that are 14.4v or more. While Z-saw calls it a fine wood blade, its non-prunig applications are more along the lines of cutting timber frames, not furniture.

The Woodworking Blade is a similar size and tooth pattern to the Pruning saw, but it's designed for cutting timbers, plywood and other construction applications, where it will give a cleaner cut than standard recip blades. The tip of the Woodworking Blade is curved up to facilitate plunge cuts in wood.

Specifications

• Pruning Blade
• Cutting Length — 210mm (8-1/4")
• Tooth Count —3.0mm/tooth (8tpi)
• Blade Thickness — .9mm (.035")
• Fine Wood & Pruning Blade
• Cutting Length — 300mm (11-13/16")
• Tooth Count —3.5mm/tooth (7tpi)
• Blade Thickness — 1.2mm (.047")
• Cordless saws must be at least 14.4v
• Woodworking Blade
• Cutting Length — 210mm (8-1/4")
• Tooth Count —3.0mm/tooth (8tpi)
• Blade Thickness — .9mm (.035")

The teeth are impulse hardened and cannot be re-sharpened.

Made in Japan.

Videos