Festool offers a variety of saw blades for their miter & track saws. Each saw blade is designed for optimum performance with a particular saw and material. The quality and ease of cut is determined by several factors - saw type, blade speed, material, tooth pattern and number of teeth. Festool blades are made in Germany.

Tooth Shapes

Alternate Top Bevel (ATB) Most wood cutting blades are ATB. Every other tooth on the blade is beveled to the left or right. The sharp top edge slices cleanly into the material - reducing tearout.

Alternate Top Bevel with Raker ATB with raker adds a chipper tooth in between the alternate bevelled teeth to clear the wood chips.

Triple Chip Triple chip blades are used for cutting hard, difficult materials. They have two types of teeth that alternate: a trapezoidal tooth which is beveled on each side and a flat tooth.

Flat Tooth with Chamfer (F-FA) F-FA blades are used for cutting hard, difficult materials. They have flat teeth with variable chamfers for consistent quality and a long service life.

Flat Top Flat top blades are used for cutting uniform materials that don't require the slicing cut of an ATB.

Material & Speed

All Festool saws have variable speed so you can match the blade speed to the material and cut. Festool blades are color-coded for the recommended material.

Yellow for wood and plastics - Speed 3-6
Red for plastics - Speed 3-5
Blue for Plastic & Non-ferrous Metals - Speed 3-6

Blade Sizes

We stock Festool circular saw blades in six diameters.

160mm Diameter (~6-1/4") - to fit TS 55 EQ, TS 55 REQ, TS 55 FEQ, TSC 55, TSC 55 K, HKC 55 & HK 55 saws. (160mm blades are available in 2.2mm kerf and 1.8mm kerf. See notes below.)

2.2mm kerf 160mm blades fit TS 55 EQ, TS 55 REQ & TSC 55 Saws. They cannot be used on saws designed for 1.8mm kerf blades.
1.8mm kerf 160mm blades fit TSC 55 K, TS 55 FEQ, HKC 55 & HK 55 saws. They cannot be used on saws designed for 2.2mm blades.

168mm Diameter (~6-5/8") - to fit CSC SYS 50, TS 60 KEB & TSV 60 KEB Saws.
210mm Diameter (~8-1/4") - to fit TS 75 EQ Track Saws.
216mm Diameter (~8-1/2") - to fit KSC 60 Kapex Miter Saws
260mm Diameter (~10-1/4") - to fit KS 120 Kapex Miter Saws
190mm Diameter (~7-1/4") - to fit AT 65 Track Saws (This is an older model.)

PLEASE NOTE! When selecting a 160mm blade, please pay close attention to the model number & and kerf required for your saw. 1.8mm kerf blades WILL NOT work on saws designed for 2.2mm kerf blades.
2.2mm kerf blades should not be used on saws designed for 1.8mm kerf blades.

Size	Type	Kerf	Hook Angle	Bevel Angle	Tooth Type	Teeth	Festool #
160mm - 6-1/4" Fits TS 55 EQ, TS 55 REQ & TSC 55 REB	Fine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped.	2.2mm	5°	15°	ATB	48	495377 TSC 55 REB & TS 55 REQ Std equipment
160mm - 6-1/4" Fits TS 55 EQ, TS 55 REQ & TSC 55 REB	Universal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped.	2.2mm	15°	16°	ATB	28	496304
160mm - 6-1/4" Fits TS 55 EQ, TS 55 REQ & TSC 55 REB	Panther Rip - Coarse cutting rip blade for use with building panels, wood and soft plastics Carbide-tipped.	2.2mm	20°	15°	ATB	12	496305
160mm - 6-1/4" Fits TS 55 EQ, TS 55 REQ & TSC 55 REB	Cement- & gypsum-bonded materials - Designed for cutting cement-based boards and siding (like Hardieplank®. Diamond-tipped	2.2mm	-5°	n/a	FTG	4	202958 NOT FOR USE ON HK 55 saws!
160mm - 6-1/4" Fits TS 55 EQ, TS 55 REQ & TSC 55 REB	Solid Surface & Laminate - Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped	2.2mm	4°	15°	TC	48	496309
160mm - 6-1/4" Fits HK 55, TS 55 FEQ & TSC 55 K Saws	Fine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped.	1.8mm	10°	15°	ATBR	42	495377 TSC 55 REB & TS 55 REQ Std equipment
160mm - 6-1/4" Fits HK 55, TS 55 FEQ & TSC 55 K Saws	Universal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped.	1.8mm	15°	10°	ATB	28	205560
160mm - 6-1/4" Fits HK 55, TS 55 FEQ & TSC 55 K Saws	Standard Saw Blade - Coarse-cutting rip blade for use with building panels, wood and soft plastics. Carbide-tipped.	1.8mm	25°	15°	ATB	18	500461 HKC 55 EB & HK 55 EQ Std equipment
160mm - 6-1/4" Fits HK 55, TS 55 FEQ & TSC 55 K Saws	Panther Rip - Coarse cutting rip blade for use with building panels, wood and soft plastics Carbide-tipped.	1.8mm	20°	15°	ATB	12	205559
160mm - 6-1/4" Fits HK 55, TS 55 FEQ & TSC 55 K Saws	Cement- & gypsum-bonded materials - Designed for cutting cement-based boards and siding (like Hardieplank®. PCD (polycrystalline diamond) tooth construction blade.	1.8mm	10°	n/a	FTG	4	205564
160mm - 6-1/4" Fits TS 55 F, TSC 55 K, TSC 55 KS,HK 55, HKC 55 & HKC 55 K	Hard to cut materials - Designed for demanding applications such as HPL and CPL laminates, fiber-cement board, gypsum-bonded panels, and solid-surface materials like Corian®. PCD (polycrystalline diamond) tooth construction blade.	1.8mm	10°	45° & 31.43°	TCG + Raker	28	578701 New
160mm - 6-1/4" Fits HK 55, TS 55 FEQ & TSC 55 K Saws	Solid Surface & Laminate - Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped	1.8mm	-5°	20°	TC	52	205562
160mm - 6-1/4" Fits HK 55, TS 55 FEQ & TSC 55 K Saws	Aluminum & Plastics - For aluminium panels and profiles, perspex, hard and fibre-reinforced plastics, non-ferrous metals, aluminium composite panels. Carbide-tipped	1.8mm	-5°	20°	TC	52	205562
168mm - 6-5/8" Fits CSC SYS 50, TS 60 KEB & TSV 60 KEB Saws	Fine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped.	1.8mm	10°	15°	ATB	42	205772 TS 60 KEB & TSV 60 KEB Std equipment
168mm - 6-5/8" Fits CSC SYS 50, TS 60 KEB & TSV 60 KEB Saws	Universal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped.	1.8mm	15°	10°	ATB	28	205571
168mm - 6-5/8" Fits CSC SYS 50, TS 60 KEB & TSV 60 KEB Saws	Panther Rip - Coarse cutting rip blade for use with building panels, wood and soft plastics Carbide-tipped.	1.8mm	20°	15°	ATB	16	205770
168mm - 6-5/8" Fits TS 60 KEB & TSV 60 KEB Saws	Cement- & gypsum-bonded materials - Designed for cutting cement-based boards and siding (like Hardieplank®. Diamond-tipped	1.8mm	12°	n/a	FTG	4	205775
168mm - 6-5/8" Fits TS 60 KEB & TSV 60 KEB Saws	Hard to cut materials - Designed for demanding applications such as HPL and CPL laminates, fiber-cement board, gypsum-bonded panels, and solid-surface materials like Corian®. PCD (polycrystalline diamond) tooth construction blade.	1.8mm	10°	45° & 31.43°	TCG + Raker	28	578702 New
168mm - 6-5/8" Fits CSC SYS 50, TS 60 KEB & TSV 60 KEB Saws	Solid Surface & Laminate - Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped	1.8mm	-5°	20°	TC	52	205773
168mm - 6-5/8" Fits CSC SYS 50, TS 60 KEB & TSV 60 KEB Saws	Aluminum & Plastics - For aluminium panels and profiles, perspex, hard and fibre-reinforced plastics, non-ferrous metals, aluminium composite panels. Carbide-tipped	1.8mm	-5°	20°	F/FA	52	205774
210mm - 8-1/4" Fits TS 75 EQ Saw	Fine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped.	2.4mm	15°	15°	ATB	52	495381
210mm - 8-1/4" Fits TS 75 EQ Saw	Universal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped.	2.4mm	15°	15°	ATB	36	495380 TS 75 EQ Std equipment
210mm - 8-1/4" Fits TS 75 EQ Saw	Standard Saw Blade - Coarse-cutting rip blade for use with building panels, wood and soft plastics. Carbide-tipped.	2.6mm	20°	15°	ATB	18	495379
210mm - 8-1/4" Fits TS 75 EQ Saw	Panther Rip - Coarse cutting rip blade for use with building panels, wood and soft plastics Carbide-tipped.	2.6mm	28°	15°	ATB	16	495378
210mm - 8-1/4" Fits TS 75 EQ Saw	Solid Surface & Laminate - Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped	2.4mm	4°	15°	TC	60	495382
216mm - 8-1/2" Fits KSC 60 EB Kapex Saw	Universal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped.	2.3mm	-5°	15°	ATB	36	576927 KSC 60 Std equipment
216mm - 8-1/2" Fits KSC 60 EB Kapex Saw	Fine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped.	2.3mm	-5°	15°	ATB	60	576928
216mm - 8-1/2" Fits KSC 60 EB Kapex Saw	Aluminum & Plastics - For aluminium panels and profiles, perspex, hard and fibre-reinforced plastics, non-ferrous metals, aluminium composite panels. Carbide-tipped	2.3mm	0°	15°	TC	64	576929
216mm - 8-1/2" Fits KSC 60 EB Kapex Saw	Solid Surface & Laminate - Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped	2.3mm	-5°	15°	MATB	60	576930
260mm - 10-1/4" Fits KS 120 EB Kapex Saw	Universal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped.	2.5mm	-5°	15°	ATB	60	495388 Kapex KS 120 Std equipment
260mm - 10-1/4" Fits KS 120 EB Kapex Saw	Fine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped.	2.5mm	-5°	15°	ATB	80	495387
260mm - 10-1/4" Fits KS 120 EB Kapex Saw	Universal & Fine-Tooth Saw Blade Package - one each of the 260mm Universal and Fine-tooth blades listed above.						203150
260mm - 10-1/4" Fits KS 120 EB Kapex Saw	Solid Surface & Laminate - Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped	2.5mm	-5°	15°	MATB	64	495386
190mm - 7-1/2" Fits AT 65 Saw	Fine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped.	2.8mm	8°	15°	ATB	48	486297

Festool Saw Blades