Every woodworker needs screwdrivers in the shop. Why not have a really nice, good-looking set?

These screwdrivers from Narex have a hardened, chrome-plated steel shaft that runs the all the way through the handle of the screwdriver and will withstand light impacts. (Don't use a 2 pound hammer, but if you need to seat the screwdriver in a worn Phillips head screw, this is really handy.) At the base of the handle, the shaft has a hex-shaped fitting. If you have an especially difficult to remove screw, you can put a wrench on the hex to generate extra torque.

The stained birch handles are triangular so you can get a good grip and they won't roll off your bench.

We offer the screwdrivers in Phillips ( #2 & #3); Robertson-Square Drive( #3); and Slotted (4.5mm -11/64", 5.5mm - 7/32" & 7mm - 9/32").

Type	Size	OAL	Handle Size	HW#
Phillips	No. 3	10-5/8" (270mm)	4-23/32" x 1-7/32" (120mm x 31mm)	148106
Slotted	1/8" (3.5mm)	6-11/16" (170mm)	3-3/4" x 15/16" (95mm x 24mm)	148107
	11/64" (4.5mm)	7-3/8" (185mm)	3-3/4" x 15/16" (95mm x 24mm)	148108
	7/32" (5.5mm)	7-11/16" (195mm)	3-3/4" x 15/16" (95mm x 24mm)	148109
	9/32" (7mm)	9-1/4" (235mm)	4-11/32" x 1-7/32" (110mm x 31mm)	148110
Square	No. 3	8-1/4" (210mm)	4-11/32" x 1-7/32" (110mm x 31mm)	148103
Metric measurements are precise. Inch measurements are approximate. OAL = Overall Length

Screwdrivers & Bits