Festool Chamfer Router Bits - 8mm shank
Backorder Item
This item is currently on backorder. We are accepting orders and will ship as soon as stock is replenished.
Satisfaction Guarantee
Satisfaction Guarantee
If for any reason you are not satisfied with any stock item purchased from Highland Woodworking, return it to us within 60 days of receipt (30 days for Festool tools) and we will promptly replace it or refund the purchase price of that item, according to your preference.
Click for more information.
Shipping & Delivery
Shipping & Delivery
Orders are processed soon after receipt and are usually shipped within 2 business days via FedEx ground or US Mail, depending on location and weight.
We do not ship combustible materials by air.
If we are out of stock on an item, we will either back order or cancel that item according to any special instructions entered with your order or our ability to source the product.
Visit our complete Shipping Information Page for more detailed information.
California Customers - Prop 65 Warning
California Customers - Prop 65 Warning
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, see www.P65Warnings.ca.gov.
Did you find an error on this page?
Did you find an error on this page?
We have made every effort to ensure our product pages are accurate and fully functioning. However, even we may miss something! If you see an error, please email us at feedback@highlandwoodworking.com. Include a link to the page, or the SKU number of the product, and short description of what’s wrong and we will address it. Thank you!
Due to Festool policy, we cannot ship Festool products outside the 48 contiguous U.S. states. Any Festool order that we ship requires an shipping address in the contiguous US.
Chamfer Bits are used to route a decorative bevel profile. Festool chamfer bits use a special type of bearing and bearing mount that allows them to be easily used with or without the bearing.
The chamfer angle is measured from the shank. A 30° chamfer bit has a 30° angle between the cutting edge and the shank. See the figure to the right.
Please note: These bits all have 8mm shanks.
|
Cutting
Diameter |
Cutting
Length |
Chamfer
Angle |
Shank |
Overall
Length |
Cutter
Material |
HW # | Festool # |
|---|---|---|---|---|---|---|---|
|
26mm
(~1-1/32") |
7mm
(~9/32") |
45° | 8mm |
48mm
(~1-7/8") |
Carbide | 726051 |
499799
(S8 HW 45° D26-KL OFK) |
|
25mm
(~1") |
11mm
(~7/16") |
30° | 8mm |
50mm
(~2") |
Carbide | 726052 |
499800
(S8 HW 30° D25-KL OFK) |
|
27mm
(~1-1/16") |
8mm
(~5/16") |
45° | 8mm |
55mm
(~2-1/8") |
Carbide Insert | 726054 |
499807
♦
(W S8 HW 45° D27 12x12 KL) |
| ♦ This bit uses 12mm x 12mm replaceable carbide inserts . | |||||||




