Festool Roundover Router Bits - Hollow Shank
Satisfaction Guarantee
Satisfaction Guarantee
If for any reason you are not satisfied with any stock item purchased from Highland Woodworking, return it to us within 60 days of receipt (30 days for Festool tools) and we will promptly replace it or refund the purchase price of that item, according to your preference.
Click for more information.
Shipping & Delivery
Shipping & Delivery
Orders are processed soon after receipt and are usually shipped within 2 business days via FedEx ground or US Mail, depending on location and weight.
We do not ship combustible materials by air.
If we are out of stock on an item, we will either back order or cancel that item according to any special instructions entered with your order or our ability to source the product.
Visit our complete Shipping Information Page for more detailed information.
California Customers - Prop 65 Warning
California Customers - Prop 65 Warning
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, see www.P65Warnings.ca.gov.
Did you find an error on this page?
Did you find an error on this page?
We have made every effort to ensure our product pages are accurate and fully functioning. However, even we may miss something! If you see an error, please email us at feedback@highlandwoodworking.com. Include a link to the page, or the SKU number of the product, and short description of what’s wrong and we will address it. Thank you!
Due to Festool policy, we cannot ship Festool products outside the 48 contiguous U.S. states. Any Festool order that we ship requires an shipping address in the contiguous US.
Special carbide-tipped roundover bits only for use in the Festool OFKC 500 Cordless Edge Router.
Festool's small roundover bits are ideal for clean, precise edge profiling on small and delicate workpieces. Designed primarily for solid wood, they also deliver smooth results on plastic edge banding. The collet-free, hollow-shaft design mounts straight onto the trim router shaft - no collet required - for stable, wobble-free cutting. The result is a smooth, uniform round-over and a clean finish with minimal setup and maximum control.
Single flute bits reduce heat to prevents burn marks, especally when routing across the grain. Double flute bits provide longer cutting life and more consistent finshes.
These bits have hollow shanks and are secured to the router using the center screw.
Bearing guide and mounting screw are not included. The OFK 500 router comes with a screw and bearing that can be used with all of these bits. Replacement screws and bearings are sold separately.
| Cutting Diameter (D) | Cutting Radius (R) | Cutters | Festool # |
|---|---|---|---|
| 27 mm (~1-1/16") |
1 mm (~1/32") |
1 | 578376 (HW R1-OFK 500 Z1) |
| 27 mm (~1-1/16") |
2 mm (~3/32") |
1 | 578377 (HW R2-OFK 500 Z1) |
| 27 mm (~1-1/16") |
3 mm (~1/8") |
1 | 578378 (HW R3-OFK 500 Z1) |
| 27 mm (~1-1/16") |
2 mm (~3/32") |
2 | 490092 (HW R2-OFK 500) |
| 27 mm (~1-1/16") |
3 mm (~1/8") |
2 | 490093 (HW R3-OFK 500) |
| 27 mm (~1-1/16") |
4 mm (~5/32") |
2 | 490094 (HW R4-OFK 500) |
| 27 mm (~1-1/16") |
5 mm (~3/16") |
2 | 490095 (HW R5-OFK 500) |
| 27 mm (~1-1/16") |
6 mm (~1/4") |
2 | 490096 (HW R6-OFK 500) |
| Metric measurements are precise. Inch measurements are approximate. | |||