Iturra Design Spinner Bandsaw Tension Crank
Backorder Item
This item is currently on backorder. We are accepting orders and will ship as soon as stock is replenished.
Satisfaction Guarantee
Satisfaction Guarantee
If for any reason you are not satisfied with any stock item purchased from Highland Woodworking, return it to us within 60 days of receipt (30 days for Festool tools) and we will promptly replace it or refund the purchase price of that item, according to your preference.
Click for more information.
Shipping & Delivery
Shipping & Delivery
Orders are processed soon after receipt and are usually shipped within 2 business days via FedEx ground or US Mail, depending on location and weight.
We do not ship combustible materials by air.
If we are out of stock on an item, we will either back order or cancel that item according to any special instructions entered with your order or our ability to source the product.
Visit our complete Shipping Information Page for more detailed information.
California Customers - Prop 65 Warning
California Customers - Prop 65 Warning
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, see www.P65Warnings.ca.gov.
Did you find an error on this page?
Did you find an error on this page?
We have made every effort to ensure our product pages are accurate and fully functioning. However, even we may miss something! If you see an error, please email us at feedback@highlandwoodworking.com. Include a link to the page, or the SKU number of the product, and short description of what’s wrong and we will address it. Thank you!
The Iturra Design Spinner Bandsaw Tension Crank upgrades the blade tension adjusting knob on older Delta 14" and Jet 14" bandsaws.
The Spinner's 4-7/8" diameter handwheel with 3" crank handle, coupled with the 3/8" x 12 TPI Acme threaded rod (and mating 3/4" thick brass tension nut), will enable you to make quick work of lowering and raising the wheel on your bandsaw.
Your blade changes will now become much easier to accomplish, hopefully motivating you to switch out blades to best match up with different cutting tasks in the shop. In addition, because removing and applying blade tension is so easy, the maintenance job to release blade tension for periods when the saw is not in use becomes a breeze.
The Acme threaded rod has fewer threads per inch than the OEM rod, so the Spinner moves the bandsaw wheel further with every revolution. The rod end that bears on the saw's frame is ground with a conical point to reduce rotational friction, while the extra thick precision brass nut helps disperse stresses on the threads.
At 13-1/2" long, the Acme rod positions the handwheel well clear of the upper wheel shroud of the saw, providing plenty of clearance to achieve a quick-paced spinning motion. The handwheel and crank handle are heavy cast iron with a chrome polish.
Please Note: The Spinner Bandsaw Tension Cranks are intended to fit older Delta/Rockwell 14" and Jet 14" saws WITHOUT a factory equipped quick release tension lever. They will fit onto saws that are equipped with the Carter Quick Release™ tension lever.