Oneway Cast Iron Faceplate - 10 inch
Backorder Item
This item is currently on backorder. We are accepting orders and will ship as soon as stock is replenished.
Satisfaction Guarantee
Satisfaction Guarantee
If for any reason you are not satisfied with any stock item purchased from Highland Woodworking, return it to us within 60 days of receipt (30 days for Festool tools) and we will promptly replace it or refund the purchase price of that item, according to your preference.
Click for more information.
Shipping & Delivery
Shipping & Delivery
Orders are processed soon after receipt and are usually shipped within 2 business days via FedEx ground or US Mail, depending on location and weight.
We do not ship combustible materials by air.
If we are out of stock on an item, we will either back order or cancel that item according to any special instructions entered with your order or our ability to source the product.
Visit our complete Shipping Information Page for more detailed information.
California Customers - Prop 65 Warning
California Customers - Prop 65 Warning
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, see www.P65Warnings.ca.gov.
Did you find an error on this page?
Did you find an error on this page?
We have made every effort to ensure our product pages are accurate and fully functioning. However, even we may miss something! If you see an error, please email us at feedback@highlandwoodworking.com. Include a link to the page, or the SKU number of the product, and short description of what’s wrong and we will address it. Thank you!
This is the biggest, beefiest, most massive faceplate we carry. Most turners will never need something this big. It's a heavy duty 10 inch cast iron faceplate ! If you're turning something too big for this faceplate, we're really impressed!
This big faceplate doesn't come direct-threaded to fit your lathe. It uses the same threaded inserts as the Oneway Stronghold chuck . The insert fits into the back of the faceplate so you can thread it onto your lathe spindle.
For all spindle sizes, a threaded insert is REQUIRED to adapt this faceplate. See the chart below for the sizes available. If you do not see your size call us for assistance. If you choose to order this faceplate without an insert and you do not already have an insert, it will not work.
| Threaded Inserts | |
|---|---|
| Size | Lathes |
| 1"-8tpi RH/LH | Some Delta, Jet, General, Rikon and many others |
| 1"-12tpi RH | Grizzly |
| 1-1/4"-8tpi RH/LH | Some Delta, General, Powermatic, Jet, Rikon |
| 1-1/2"-8tpi RH/LH | Some General, Powermatic & Conover (Conover requires a special insert because the spindle nose is longer than most lathes) |
| Blank Insert | This insert is for lathes with an unusual spindle size or thread pattern. You will need to have it custom threaded at a machine shop in your area. |
| No Insert | This facaplate REQUIRES an insert to operate. Only order your chuck without an insert if you already have one. |
| This is a general guide. If you are not certain which is the correct thread, check your lathe manual or call us. |
|