Pegas Dovetail Progressive Reverse Fret Saw Blades - Pack of 12
Backorder Item
This item is currently on backorder. We are accepting orders and will ship as soon as stock is replenished.
Satisfaction Guarantee
Satisfaction Guarantee
If for any reason you are not satisfied with any stock item purchased from Highland Woodworking, return it to us within 60 days of receipt (30 days for Festool tools) and we will promptly replace it or refund the purchase price of that item, according to your preference.
Click for more information.
Shipping & Delivery
Shipping & Delivery
Orders are processed soon after receipt and are usually shipped within 2 business days via FedEx ground or US Mail, depending on location and weight.
We do not ship combustible materials by air.
If we are out of stock on an item, we will either back order or cancel that item according to any special instructions entered with your order or our ability to source the product.
Visit our complete Shipping Information Page for more detailed information.
California Customers - Prop 65 Warning
California Customers - Prop 65 Warning
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, see www.P65Warnings.ca.gov.
Did you find an error on this page?
Did you find an error on this page?
We have made every effort to ensure our product pages are accurate and fully functioning. However, even we may miss something! If you see an error, please email us at feedback@highlandwoodworking.com. Include a link to the page, or the SKU number of the product, and short description of what’s wrong and we will address it. Thank you!
Pègas designed these blades specifically for use removing dovetail waste with a fret saw. It has center-aligned reverse teeth. You'll get a clean cut on both sides of the wood because both sides are “entry cuts”. Tooth spacing is optimized to remove waste efficiently while maintaining a clean cut. They fade at the ends of the blade to make starting easier in hard, difficult woods. The blades are thin enough to drop into the thinnest kerf, even those cut by Japanese dozuki saws.
Use #5 blades for stock up to 3/4" thick. Use #9 blades for stock 3/4" and thicker.
| Size | Thickness | Width | Length | Teeth |
|---|---|---|---|---|
| 5R |
.0145"
.34mm |
.0425"
1.08mm |
5"
130mm |
16.5 tpi
6.5 tpc |
| 9R |
.06"
.42mm |
.055"
1.4mm |
5"
130mm |
13 tpi
5.2 tpc |
| tpi = teeth per inch. tpc = teeth per centimeter. | ||||
Not for use in power scroll saws.
