Veritas Inset Vise
Backorder Item
This item is currently on backorder. We are accepting orders and will ship as soon as stock is replenished.
Satisfaction Guarantee
Satisfaction Guarantee
If for any reason you are not satisfied with any stock item purchased from Highland Woodworking, return it to us within 60 days of receipt (30 days for Festool tools) and we will promptly replace it or refund the purchase price of that item, according to your preference.
Click for more information.
Shipping & Delivery
Shipping & Delivery
Orders are processed soon after receipt and are usually shipped within 2 business days via FedEx ground or US Mail, depending on location and weight.
We do not ship combustible materials by air.
If we are out of stock on an item, we will either back order or cancel that item according to any special instructions entered with your order or our ability to source the product.
Visit our complete Shipping Information Page for more detailed information.
California Customers - Prop 65 Warning
California Customers - Prop 65 Warning
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, see www.P65Warnings.ca.gov.
Did you find an error on this page?
Did you find an error on this page?
We have made every effort to ensure our product pages are accurate and fully functioning. However, even we may miss something! If you see an error, please email us at feedback@highlandwoodworking.com. Include a link to the page, or the SKU number of the product, and short description of what’s wrong and we will address it. Thank you!
The Veritas Inset Vise is a compact version of a wagon vise. It adds an adjustable dog to a workbench - allowing you to clamp your workpiece against one of your bench dogs. The clamping jaw of the inset vise has a 4" range of travel, but the clamping capacity is limited only by the length of your bench and the placement of the dog holes. The vise slide has two mounting positions – 3-7/8" apart – for the vise jaw. This spacing gives full clamping coverage for dog holes up to 7-3/4" apart. When not is use, the vise jaw can be removed for a completely flat bench surface.
Jaws
The standard Inset Vise jaw is 1/2" tall x 1-3/16" wide. It has a slot in its face that accepts a 1/4-20 nut so you can mount a shop made accessory jaw. The Pivoting Jaw (sold separately) is used for clamping odd-shaped items. It is 1/2" tall and 1-1/2" wide. The Low Profile Jaw (sold separately) is used for clamping thin items without obstruction. It can hold workpieces as thin as 1/4" and is especially useful when handplaning.
Installation
The Inset Vise can be installed in any workbench that is at least 1-1/4" thick. you'll need enough room to make a mortise 10-3/4" long by 3" wide by 29/32" deep. (This is the space required. The mortise is actually stepped. See the Veritas Inset Vise Installation Manual
Additional Information
Veritas Inset Vise Installation Manual