FREE SHIPPING on orders of $99 or more see details* (Exclusions apply, click for details)
1 4

Record Power Faceplate Rings

From $29.99
Shipping calculated at checkout.
Size

Satisfaction Guarantee

If for any reason you are not satisfied with any stock item purchased from Highland Woodworking, return it to us within 60 days of receipt (30 days for Festool tools) and we will promptly replace it or refund the purchase price of that item, according to your preference.

Click for more information.

Shipping & Delivery

Orders are processed soon after receipt and are usually shipped within 2 business days via FedEx ground or US Mail, depending on location and weight.

We do not ship combustible materials by air.

If we are out of stock on an item, we will either back order or cancel that item according to any special instructions entered with your order or our ability to source the product.

Visit our complete Shipping Information Page for more detailed information.

California Customers - Prop 65 Warning

This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, see www.P65Warnings.ca.gov.

Did you find an error on this page?

We have made every effort to ensure our product pages are accurate and fully functioning. However, even we may miss something! If you see an error, please email us at feedback@highlandwoodworking.com. Include a link to the page, or the SKU number of the product, and short description of what’s wrong and we will address it. Thank you!

Faceplates have always been regarded as a safe and secure holding method. However, they are a slower mounting method (especially when compared to a scroll action chuck). Now, you can have the best of both worlds. Faceplate Rings offer the same secure holding power of a faceplate, combined with the quick convenience of your chuck.

  • The Faceplate Rings fit directly into your Record Power Chuck (appropriate jaw needs to be in the chuck). You don't have to remove the chuck from your lathe, as you would with traditional faceplate mounting.
  • Fast mounting method for bowl blanks
  • Best alternative to your woodworm screw mounting, which is only recommended for smaller bowls
  • It is a strong mounting method, even with irregular sized wood, and rough cut surfaces
(Put your cursor over the small image to the left for a larger image.)
Size Outside
Diameter 		Gripe
Diameter 		Inside
Diameter 		Compatible
Chucks 		Required
Jaws 		RP #

50mm - 2" 		87mm
(3-7/16") 		60mm
(2-3/8") 		44mm
(1-3/4") 		SC3 and SC4 Chucks 62313 50mm
Standard Jaws 		62572

100mm - 4" 		126mm
(4-15/16") 		60mm
(2-3/8") 		44mm
(1-3/4") 		SC3 and SC4 Chucks 62313 50mm
Standard Jaws 		62572

68mm - 2-11/16" 		68mm
(2-11/16") 		42mm
(1-5/8") 		28mm
(1-1/8") 		SC1 and SC2 Chucks 62303 40mm
Standard Jaws 		62571

Metric measurements are binding. Inch measurements are approximate.

All of the required jaws are standard equipment on the compatible chuck.